NM
PROFESSIONALAvailable1 unit in stock

Gemini Pro

NM-BATH-A2-DTS

Double-compartment modular unit — two fully independent bathrooms (toilet + sink in each). Professional-grade Type A. For demanding environments and high-traffic use.

Founding Customer Price$3,894$4,099
Two independent compartments — each with its own toilet and sink
Simultaneous use with full privacy — two complete bathrooms in one module
Type A detachable construction — the highest-performance option in the line
High-density insulated sandwich panels
Heavy-duty galvanized steel frame
5-year structural warranty included

No commitment required. We respond within 24 hours.

Technical Specs

Dimensions (L × W × H)7'1" × 4'1" × 7'10"
Net Weight639 lbs
Gross Weight584 lbs
Volume (ft³)226 ft³
Installation3 h
MaterialsType A detachable sandwich panels, heavy-duty galvanized steel frame
SeriesPROFESSIONAL
ModelDUO
ManufacturerTangshan Jinjiama Supply Chain Management Co., Ltd.
Country of OriginChina

About this product

The Gemini Pro takes the Gemini's dual full-bathroom configuration to the highest specification in the PROFESSIONAL line. Each of its two compartments has its own toilet and sink, providing complete and independent sanitary access for two simultaneous users. Type A construction with detachable sandwich panels and a heavy-duty galvanized steel frame makes it the right choice for high-traffic, long-term installations: commercial buildings, office complexes, industrial facilities, permanent event venues, and any project where both durability and capacity are equally critical.

Installation & Use

Site Requirements
  • • Site preparation: Level ground or concrete slab (min. 4" thick)
  • • Water supply: 3/4" or 1/2" inlet — confirm with contractor before installation
  • • Drainage: 3" drain pipe connection required
  • • Electrical: 110V/20A circuit (GFCI protected)
  • • Clearance: 24" (2 ft) on all sides for installation access
Installation Process

Estimated time: 3 hours with professional crew

  1. 1. Site inspection and utility marking
  2. 2. Delivery and positioning with forklift or crane (coordinated by the buyer or contractor)
  3. 3. Plumbing and electrical connections performed by a licensed contractor hired by the buyer
  4. 4. Leveling and anchoring
  5. 5. Final inspection and commissioning by buyer's contractor

NOVAMOD sells products, not installation services. Plumbing, electrical, and mechanical connections must be performed by licensed contractors arranged and paid by the buyer. NOVAMOD does not provide or supervise installation.

Maintenance Guide
  • • Annual inspection of the unit recommended
  • • Seals and gaskets: inspect every 12 months, replace as needed
  • • Exterior panels: clean with mild detergent and soft cloth — avoid abrasive cleaners or pressure washers
  • • Plumbing: flush and inspect all connections annually for leaks or mineral buildup
  • • Caulking and sealant: reapply as needed to prevent moisture infiltration, especially at panel joints

This maintenance guide is a general recommendation only. The owner is solely responsible for all upkeep. NOVAMOD is not responsible for maintenance, improper maintenance, or any damage resulting from neglect or third-party service.

Get a quote for this product

Fill out this form and we'll send you pricing and availability within 24 hours.

No commitment required · We respond within 24 hours