Essential
NM-BATH-B1-TB
Single-compartment modular bathroom. Aluminum insulated panels and aluminum frame. Built for extreme climates — residential and commercial use.
No commitment required. We respond within 24 hours.
Technical Specs
About this product
Installation & Use
Site Requirements
- • Site preparation: Level ground or concrete slab (min. 4" thick)
- • Water supply: 3/4" or 1/2" inlet — confirm with contractor before installation
- • Drainage: 3" drain pipe connection required
- • Electrical: 110V/20A circuit (GFCI protected)
- • Clearance: 24" (2 ft) on all sides for installation access
Installation Process
Estimated time: 1 hours with professional crew
- 1. Site inspection and utility marking
- 2. Delivery and positioning with forklift or crane (coordinated by the buyer or contractor)
- 3. Plumbing and electrical connections performed by a licensed contractor hired by the buyer
- 4. Leveling and anchoring
- 5. Final inspection and commissioning by buyer's contractor
NOVAMOD sells products, not installation services. Plumbing, electrical, and mechanical connections must be performed by licensed contractors arranged and paid by the buyer. NOVAMOD does not provide or supervise installation.
Maintenance Guide
- • Annual inspection of the unit recommended
- • Seals and gaskets: inspect every 12 months, replace as needed
- • Exterior panels: clean with mild detergent and soft cloth — avoid abrasive cleaners or pressure washers
- • Plumbing: flush and inspect all connections annually for leaks or mineral buildup
- • Caulking and sealant: reapply as needed to prevent moisture infiltration, especially at panel joints
This maintenance guide is a general recommendation only. The owner is solely responsible for all upkeep. NOVAMOD is not responsible for maintenance, improper maintenance, or any damage resulting from neglect or third-party service.
Get a quote for this product
Fill out this form and we'll send you pricing and availability within 24 hours.
